Orders Over $100 get FREE SHIPPING and No Handling Fees

New Site  |  Contact Us  |  Login  |  Cart


  1. Fully Integrated Hood Scoop

  2. Functional Ram Air Design which diverts cool air from outside into engine bay

  3. Steel riveted latch plate designed to provide maximum safety in the most extreme conditions

  4. Cool air exit chamber which delivers it right over air box.

  5. We will meet or beat any competitor's delivered price for the same merchandise.

  6. Click here for METAL HOODS!

Notice on "All" Mustang® Hoods  Hood will need to be fitted, sanded, primed, and painted. After paint installation time is approximately 1/2 hour. Hoods will have functional "Ram Air" when noted. Please allow 7-10 days delivery. Some hoods come with grills to fill in the holes. It's recommended when running a fiberglass hood, to use hood pins however factory latch and hinges are used to mount all the hoods below. The only pictures we have available are the ones represented below.

Please Note: Due to the delicate nature of shipping fiberglass it's important to note the following damage policy. In all cases, Mustang Depot pre-inspects all products for damages prior to shipping. If you receive a package that has been damaged, if the opportunity exists, please notify the driver prior to him leaving. If significant damage exists simply refuse it. This will speed up the damage claim process and in some cases, they will not even accept the claim without a damage notation from the driver. It's best to open the package in front of the driver. We insure the products full value and it is the responsibility of the carrier to reimburse losses. Damage claim losses are not Mustang Depot's responsibility. Please keep the product and packaging in the original condition in which you receive it, for investigation by the freight company responsible. The claim cannot be paid if the packaging is not present! Please call with the claim number to get the process started for reimbursement 702-262-0011!

1979-1993 Mustang Fiberglass Hood Accessories


Deluxe Hood Pin Kit (recommended for all fiberglass hoods) $29.99/ea


 Billet Hood Pin Kit
This stainless steel and billet aluminum kit comes complete with special mounting brackets 05-08. Mounting instructions included for 05-08 but can be adapted to fit early model Mustang®s as well. Does not fit GT500.


Stainless Hood Pin Kit $69.99/kit
1987-1993 Mustang® Fiberglass Hoods
Part # Description Price Qty Purchase


1987-1993 Mustang® SHEET METAL 2" Cowl Hood with bug screen


1987-1993 Mustang® Fiberglass Spider Style Hood


1987-1993 Mustang® Fiberglass Mach I Style Hood


1987-1993 Mustang® Fiberglass 3" Cowl Hood


1987-1993 Mustang® Fiberglass 4" Cowl Hood


1987-1993 Mustang® Fiberglass Cobra R 2000 Style Hood


1987-1993 Mustang® Fiberglass Cobra R Style Hood


1987-1993 Mustang® Fiberglass Cobra R Style w/SVO Scoop Hood


1987-1993 Mustang® Fiberglass Mach 2 Style Hood


1987-1993 Mustang® Fiberglass SS Style Hood
1983-1986 Mustang® Fiberglass Hoods- Special Order 2-3 weeks
Part # Description Price Qty Purchase

1983-1986 Mustang® Fiberglass 3" Cowl Hood Heat Extractor

MR-MF83HCL 1983-1986 Mustang® Fiberglass Cowl Hood w/Louvers

1983-1986 Mustang® Fiberglass 2" Cowl Hood

1983-1986 Mustang® Fiberglass 3" Cowl Hood

1983-1986 Mustang® Fiberglass 4.5" Blower Cowl Hood
MR-MF84HS 1981-1986 Mustang® Fiberglass 84 Style SVO Hood
1979-1982 Mustang® Fiberglass Hoods - Special Order 2-3 weeks
Part # Description Price Qty Purchase
MR-MF79H 1979-1982 Mustang® Fiberglass Hood - Stock Style

1979-1982 Mustang® Fiberglass 2.5" Cowl Hood

1979-1986 Capri Fiberglass 2.5" Cowl Hood

Back to Exterior

Please Note:  Fiberglass body parts do not fit the same as stamped steel parts.  While they can be finished to show quality, fiberglass body parts are built closer to race car standards than show car standards.  We have come to this conclusion after many years of installing and selling fiberglass body parts from many different manufacturers.  Check fit before sanding or painting your new fiberglass pieces.  If fiberglass parts have been sanded or painted they can no longer be sold as new for either race or show purposes.  For this reason, the manufacturer will not warranty such parts.  Our policy for returning fiberglass parts is limited to the purchase price of the unit.  All freight charges incurred are the responsibility of the purchaser/customer.  For fiberglass hoods, removal of stock hood springs and use of a prop rod and hood pins are highly recommended. Mustang Depot is not affiliated with Ford Motor Company. All products herein are reproductions and not affiliated directly with either Ford or Shelby American unless noted. All Ford products are licensed by Ford through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.


Hot Mods


Snow Performance Boost Cooler Kits

Auto Meter Gauges

Mustang Mods

Clutch Quadrants
1979-1993 Mustang®

Headers - JBA

1986-2004 Mustang®

Trunk Mats
1979-1993 Mustang®

Ceramic Shorty
1986-1993 Mustang®

Only $199

 Headlight Sets
1987-1993 Mustang®
Only $99.99/set

Trailing Arms

1979-1993 Mustang
Only $129.99/set

Power Packages
1999-2004 Mustang®
Tuner, Intake and Exhaust

Tail Lenses
Ford Tooling
1987-93 Mustang

CenterForce Clutches

Stripes, Rear Letters
1994-2004 Mustang®

Website and Contents Copyright © 1998-2019 Automotive Internet Retailers, LLC DBA Mustang Depot, a division of Depot Automotive Group® All rights reserved. Ford®, Ford Mustang®, Mustang GT®, SVT Cobra®, Mach 1 Mustang®, Boss Mustang®, Cobra R®, Bullitt Mustang®, SN95®, S197®, V6 Mustang®, Fox Body Mustang®, GT350®, GT350R® and 5.0 Mustang® are registered trademarks of Ford Motor Company®. All Ford® logo products herein are strictly licensed by Ford® to the respective supplier. Saleen® is a registered trademark of Saleen® Incorporated. Roush® is a registered trademark of Roush® Enterprises Inc. Shelby®, GT500®, GT500E® and Eleanor® are registered trademarks of Carroll Hall Shelby Trust. All Shelby® logo products are licensed to the respective manufacturer or supplier by Carroll Shelby Licensing Inc, acting on behalf of Carroll Hall Shelby Trust. Mustang Depot has no affiliation with Ford Motor Company®, Roush® Enterprises, Shelby® American or Saleen®. Throughout our website and catalogs, these terms are used for identification purposes only. All products herein are reproduction parts unless specifically noted as "original" Ford® parts. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. The State of California Proposition 65 requires we inform you that some of the products listed throughout our website may contain materials known to cause cancer, birth defects or other reproductive harm. These products also require individual product labeling by the individual manufacturer. Thank you for choosing Mustang Depot!

Home   |   Terms and Conditions  |  Return Policy  |  Site Map   |   Email List   |   Fax/Mail   |   Links   |   Line Card   |   About Us  |  Contact Us 

Mustang Depot
2510 E. Sunset Rd #3
Las Vegas, NV 89120