G-Bar is a bolt-in "Canted Four-Bar Suspension System" that
directly replaces the OEM leaf springs and shocks for remarkably improved
handling and performance. Can be used with specific bolt-in FAB9 housing or
customer's existing housing. Additional welding is required with non-FAB9
bolt-in housings. Please call for ordering kit with a custom FAB9 housing.
Installation instructions included. Tech support can be supplied if needed.
Please specify the spring rate desired 110-350 lb ratings available. 150-175#
would be a good range for driver to street performance applications. 200# for
aggressive street driving or cars with additional weight in the rear. For every
100 pounds added, 25#'s in spring rate is needed. Click here for the
Technical Data Sheet. The direct fit housings below use the late model
Torino flange. They are measured at the stock widths for the year range
selected. Click here for Axle and
Brake packages. Click here for
addtional 9" Coilover Springs
GBar Systems
Part
#
Description
Price
Qty
Purchase
TCP-5800-M10-SA
1964-66 TCP G-Bar Poly Eye Kit with Single
Adjustable Vari-Shocks.
$1739.00/kit
TCP-5800-M20-SA
1967-70 TCP G-Bar Poly Eye Kit with Single
Adjustable Vari-Shocks.
$1739.00/kit
TCP-5800-M10-DA
1964-66 TCP G-Bar Poly Eye Kit with Double
Adjustable Vari-Shocks.
$2013.00/kit
TCP-5800-M20-DA
1967-70 TCP G-Bar Poly Eye Kit with Double
Adjustable Vari-Shocks.
$2013.00/kit
TCP-5804-M10-SA
1964-66 TCP G-Link Pivot Ball Kit with Single
Adjustable Vari-Shocks.
$2149.00/kit
TCP-5804-M20-SA
1967-70 TCP G-Link Pivot Ball Kit with Single
Adjustable Vari-Shocks.
$2149.00/kit
TCP-5804-M10-DA
1964-66 TCP G-Link Pivot Ball Kit with Double
Adjustable Vari-Shocks.
$2418.00/kit
TCP-5804-M20-DA
1967-70 TCP G-Link Pivot Ball Kit with Double
Adjustable Vari-Shocks.
$2418.00/kit
TCP-5813-M10-SA
1964-66 TCP G-Link Billet Pivot Ball Kit with Single
Adjustable Vari-Shocks.
$2249.00/kit
TCP-5813-M20-SA
1967-70 TCP G-Link Billet Pivot Ball Kit with Single
Adjustable Vari-Shocks.
1964-66 Fab9 Direct Fit Housing for
GBar, Mild Steel, Chassis Mount for Slide Link-ARB
$989.00/ea
84M10-611
1964-66 Fab9 Direct Fit Housing for
GBar, 4130 Steel, Chassis Mount for Slide Link-ARB
$1389.00/ea
84M10-701
1964-66 Fab9 Direct Fit Housing for
GBar, Mild Steel, Chassis Mount for Splined End-ARB
$1039.00/ea
84M10-711
1964-66 Fab9 Direct Fit Housing for
GBar, 4130 Steel, Chassis Mount for Splined End-ARB
$1439.00/ea
84M20-601
1967-70 Fab9 Direct Fit Housing for
GBar, Mild Steel, Chassis Mount for Slide Link-ARB
$989.00/ea
84M20-611
1967-70 Fab9 Direct Fit Housing for
GBar, 4130 Steel, Chassis Mount for Slide Link-ARB
$1389.00/ea
84M20-701
1967-70 Fab9 Direct Fit Housing for
GBar, Mild Steel, Chassis Mount for Splined End-ARB
$1039.00/ea
84M20-711
1967-70 Fab9 Direct Fit Housing for
GBar, 4130 Steel, Chassis Mount for Splined End-ARB
$1439.00/ea
Anti Roll Bar for Direct Fit Housing Only
If you're not ordering the housing, separate brackets are available to
integrate with your stock rear end. If ordering with one of the Gbar
kits above, the need for the bracket is inferred If ordering after
purchase of the G or Air bar kits above, you must call to add the
brackets.
Part #
Description
Price
Qty
Purchase
5812-M10
1964-70 Sliding Link Adjustable Anti
Roll Bar
$359.00/kit
5806-M10
1964-70 Splined End Tubular Anti Roll
Bar
$479.00/kit
Air Compressor Systems
Part #
Description
Price
Qty
Purchase
ART-REM7500
Remote Control System
$150.00/kit
VAS-310-4331
RidePro e2® 4-way, electronic control system,
3-gallon air tank, 150-psi compressor with 1/4” lines
$1495.00/kit
VAS-310-4431
LevelPro™
4-way, electronic control system with ride-height sensors, 3-gallon air
tank, 150-psi compressor with 1/4” lines
