Wiring Harness with GXL18 color coded wires and
connector
All gauges are pre-mounted into housing
Sending units for speedometer, temp, oil pressure are
included
Fuel gauge is set up to operate with stock 75-10 ohm
fuel sender
75-10
ohm sender can be purchased separately if needed, part
number SN39
Part
#
Description
Price
Qty
Purchase
CII-AWMU67B
1967-68 Gauge Kit with All
American Brushed Aluminum Gauges and New Aluminum Face Bezel (All
electric gauge kit pre-assembled. Includes the necessary senders)
$1398.00/kit
CII-AWMU67
1967 Gauge Kit with All
American Brushed Aluminum Gauges and New Camera Case Bezel (All
electric gauge kit pre-assembled. Includes the necessary senders)
$1298.00/kit
CII-GSMU67B
1967-68 Gauge Kit with Hot
Rod Series Gauges and New Aluminum Face Bezel (All electric gauge
kit pre-assembled. Includes the necessary senders) Camera case version
shown.
$1249.00/kit
CII-GSMU67
1967 Gauge Kit with Hot Rod
Series Gauges Gauges and New Camera Case Bezel (All electric gauge
kit pre-assembled. Includes the necessary senders)
$1149.00/kit
CII-WHMU67B
1967-68 Gauge Kit with White
Hot Series Gauges and New Aluminum Face Bezel (All electric gauge
kit pre-assembled. Includes the necessary senders) Camera case version
shown.
$1249.00/kit
CII-WHMU67
1967 Gauge Kit with White
Hot Series Gauges Gauges and New Camera Case Bezel (All electric
gauge kit pre-assembled. Includes the necessary senders)
$1149.00/kit
CII-HRMU67B
1967-68 Gauge Kit with
G/Stock Series Gauges and New Aluminum Face Bezel (All electric
gauge kit pre-assembled. Includes the necessary senders) Camera case
version shown.
$1249.00/kit
CII-HRMU67
1967 Gauge Kit with G/Stock
Series Gauges Gauges and New Camera Case Bezel (All electric gauge
kit pre-assembled. Includes the necessary senders)
$1149.00/kit
Gauge Supports - Only 1965-66 Gauge Supports now offered for your car. Accepts 4ea 2"
gauges and 1ea 3 3/8" gauge for a custom look using your stock gauge
bezel.. For 1965 GT or 1966 Standard/GT dashes. This Gauge Support does not work
with the 1964.5-65 sweeping gauge bezel. The 1964.5-65 cars can switch to this
1966 style bezel, however there is notching of the dash required.
1967-68 Gauge Supports
now offered for two 5" gauges and three 2" gauges for a custom look using your stock gauge
bezel.. For the 5" gauges, trimming the bezel is required. Complete
instructions are included.
Part
#
Description
Price
Qty
Purchase
NW-6566GS
1965-66 Gauge Support
(no gauges, no bezel)
$39.95/ea
MPP-MGS67-8
1967-68 Gauge Support (no gauges, no bezel)
1967-68 Gauge Installation Instructions - Note the epoxy portion of these
instructions has been eliminated with the new supports. They provide a
spacer to take up the room.
$34.95/ea
Custom Gauge Kits - Do it yourself - ASSEMBLY
REQUIRED
1965-66 Version with Aluminum Face Bezel and Matching Glove Box Door MD-NW65AL-EPKi
Click here to order a new
Instrument Bezel
with your new support, or order one of our Convenient New Kits
below that include the support, gauges and bezel. Modification to the
1967-68 bezel is required. Assembly is required on all gauge kits.
Selecting the 1965GT bezel raises the price by $10. When going from the 1964-65 sweeping
style gauge cluster, you will need to make a small notch in the dash to allow
the center gauge to clear. Click on part numbers for pictures. On the 65-66
cluster the picture link shows the 1966 bezel w/gauges. The kits will replace
the stock cluster in it's entirety. On all kits that includes the gauges, all
the small gauges will be electric. The only thing that changes between the
manual speedo kits and the electric speedo kits is the speedometer. All gauges
are special order and require 2-3 weeks minimum delivery. Consider our new
Hood
Mounted Tachometer to compliment your new gauges. Scott Drake's Aluminum
face bezel is now available. There is a $100 upgrade for the 1967 deluxe
aluminum version.
1967-68 Gauge Installation Instructions
1965-66 Gauge Kit with Auto
Meter Phantom Gauges and New Aluminum Face Bezel and Matching Glove Box
DoorASSEMBLY
REQUIRED (Includes: Gauge Support,
Alum Face Bezel, Alum Face Glove Box Door, 1ea
3 3/8" Mechanical 160mph Speedo, 1 ea 2 1/16" Volts, 1 ea 2 1/16" Fuel, 1ea 2 1/16" Temp,
1ea 2 1/16" Oil Pressure)
1965-66 Gauge Kit with
All
Electric Auto Meter Phantom Gauges and New Aluminum Bezel and
Matching Glove Box Door ASSEMBLY
REQUIRED (Includes: Gauge Support,
Alum Face Bezel, Alum Face Glove Box Door, 1ea
3 3/8" Electric 160mph Speedo & Sender, 1 ea 2 1/16" Volts, 1 ea 2 1/16" Fuel, 1ea 2 1/16" Temp,
1ea 2 1/16" Oil Pressure)
1965-66 Gauge Kit with Auto
Meter Traditional Chrome/Black Gauges and New Bezel ASSEMBLY
REQUIRED (Includes: Gauge Support, Camera Case Bezel, 1ea
3 1/8" Mechanical 120mph Speedo, 1 ea 2 1/16" Volts, 1 ea 2 1/16" Fuel, 1ea 2 1/16" Temp,
1ea 2 1/16" Oil Pressure)
1965-66 Gauge Kit with Auto
Meter Phantom Gauges and New Bezel ASSEMBLY
REQUIRED (Includes: Gauge Support, Camera Case Bezel, 1ea
3 3/8" Mechanical 160mph Speedo, 1 ea 2 1/16" Volts, 1 ea 2 1/16" Fuel, 1ea 2 1/16" Temp,
1ea 2 1/16" Oil Pressure)
1965-66 Gauge Kit with
All
Electric Auto Meter Phantom Gauges and New Bezel ASSEMBLY REQUIRED (Includes: Gauge Support, Camera Case Bezel, 1ea
3 3/8" Electric 160mph Speedo & Sender, 1 ea 2 1/16" Volts, 1 ea 2 1/16" Fuel, 1ea 2 1/16" Temp,
1ea 2 1/16" Oil Pressure)
1967-68 Gauge Kit with
Auto Meter Phantom Gauges and New Bezel ASSEMBLY REQUIRED (Includes: Instructions, Support for 5"
Center Gauges, Repro Bezel of your choice, 1ea 5" Mechanical 160mph Speedo, 1ea
5" 10k Tach, 1 ea 2 1/16" Oil, 1 ea 2 1/16" Fuel, 1ea 2 1/16" Temp)
1967-68 Gauge Installation Instructions - Note the epoxy portion of these
instructions has been eliminated with the new supports. They provide a
spacer to take up the room.
1967-68 Gauge Kit with
All
Electric Auto Meter Phantom Gauges and New Bezel
ASSEMBLY REQUIRED (Includes: Instructions, Support for 5"
Center Gauges, Repro Bezel of your choice, 1ea 5" Elec 160mph Speedo & Sender,
1ea 5" 10k Tach, 1 ea 2 1/16" Oil, 1 ea 2 1/16" Fuel, 1ea 2 1/16"
Temp)
1967-68 Gauge Installation Instructions - Note the epoxy portion of these
instructions has been eliminated with the new supports. They provide a
spacer to take up the room.
Custom Gauge Kits by Classic Instruments
