Click here for 1974-04 JBA Headers

Click here for 2005-Up JBA Headers


Titanium Ceramic Coating
rated at 2000 degrees Fahrenheit!
Highly recommended for our customers
using NOS or Superchargers

Extends the life of your header while reducing the heat in your engine compartment...

 

Bolt on 10-30 Horsepower in a few hours! 
All JBA Header come "Standard"
with 14 gauge steel Nickel/Chrome finish, hardware, gaskets,
instructions, and a limited
LIFE TIME MANUFACTURES WARRANTY..
If not already offered, Ceramic coatings available for all models below at the bottom of the order table.

Click Here for 
JBA Warranty Information

Through many years of installing headers, we have come to the conclusion that none will fit perfect on every car. There are different motor mounts that can raise and lower the motor which can affect the install. There are variances between cars ie. shock towers 9 times out of ten have flexed inward toward the motor. If you are not committed to making them work, don't buy them. If you attempt to install the headers, they cannot be returned. If you do not attempt the install and want to return them, the normal return policy will be in effect and a 20% restocking fee will apply.

Part # Description Price Qty Purchase
JBA-1650Z 1964-70 JBA Manual Transmission Z-Bar Modification
Adaptor for Manual Transmission Cars Using OE Linkage.

$149.95/ea

JBA Headers for Ford Cars
Part # Model Engine  Description Tube  Install *Notes* Price Qty Purchase
JBA-1650SH H Pipe for JBA-1650 289, 302 289-302 H Pipe 2.5" 1hr . $175.00/ea
JBA-1650S-2 65-73 SBF GT40P Heads 289-302 Shorty 1-5/8" 5hr

1, 3

$596.00/set
JBA-1650S-2JS 65-73 SBF GT40P Heads Silver Ceramic Coat  289-302 Shorty 1-5/8" 5hr

1, 3

$771.00/set
JBA-1650S-2JS 65-73 SBF GT40P Heads Titanium Ceramic Coat  289-302 Shorty 1-5/8" 5hr

1, 3

$771.00/set
JBA-1650S '65-73 Mustang 289-302 Shorty 1-5/8" 5hr

1, 3

$396.00/set
JBA-1650SJS '65-73 Mustang Silver Ceramic Coat  289-302 Shorty 1-5/8" 5hr

1, 3

$571.00/set
JBA-1650SJT '65-73 Mustang Titanium Ceramic Coat  289-302 Shorty 1-5/8" 5hr

1, 3

$571.00/set
JBA-6651S  65-73 Mustang 289, 302 Stainless Steel 289-302 Long Tube Tri-Y Design 1-1/2" 5hr

1, 3

$579.00/set
JBA-6651SJS  65-73 Mustang Silver Ceramic Coat  289-302 Long Tube Tri-Y Design 1-1/2" 5hr

1, 3

$859.00/set
JBA-6651SJT  65-73 Mustang Titanium Ceramic Coat  289-302 Long Tube Tri-Y Design 1-1/2" 5hr

1, 3

$859.00/set
JBA-1653SH H Pipe for JBA-1653 351w 351W H Pipe 2.5" 1hr . $185.00/ea
JBA-1653S '65-73 Mustang 351W  351W Shorty 1-5/8" 5hr

1, 3

$589.00/set
JBA-1653SJS '65-73 Mustang 351W Silver Ceramic Coat  351W Shorty 1-5/8" 5hr

1, 3

$766.00/set
JBA-1653SJT '65-73 Mustang 351W Titanium Ceramic Coat  351W Shorty 1-5/8" 5hr

1, 3

$766.00/set
JBA-6654SH '67-70 Mustang H Pipe for JBA-6654S Big Block  Non GT Cars with Tremec 5 speed 390,427 n/a 2.5" 1hr   $189.00/ea
JBA-6654S '65-73 Mustang Big Block with Tremec 5 speed 390,427,428cj. Long Tube Tri-Y Design 1.75" 5hr

1, 3

$815.00/set
JBA-6654SJS '65-73 Mustang Big Block Silver Ceramic Coat with Tremec 5 speed 390,427,428cj. Long Tube Tri-Y Design 1.75" 5hr

5

$1099.00/set
JBA-6654SJT '65-73 Mustang Big Block Titanium Ceramic Coat with Tremec 5 speed 390,427,428cj. Long Tube Tri-Y Design 1.75" 5hr

5

$1099.00/set
JBA-6655SH '67-70 Mustang H Pipe for JBA-6654S Big Block  Non GT Cars with c6, aod or 4 speed 390,427 n/a 2.5" 1hr   $189.00/ea
JBA-6655S '65-73 Mustang Big Block with c6, aod or 4 speed 390,427,428cj. Long Tube Tri-Y Design 1.75" 5hr

1, 3

$831.00/set
JBA-6655SJS '65-73 Mustang Big Block Silver Ceramic Coat with c6, aod or 4 speed 390,427,428cj. Long Tube Tri-Y Design 1.75" 5hr

5

$1111.00/set
JBA-6655SJT '65-73 Mustang Big Block Titanium Ceramic Coat with c6, aod or 4 speed 390,427,428cj. Long Tube Tri-Y Design 1.75" 5hr

5

$1111.00/set

Notes

1. 65-73 vehicles w/standard trans using their stock clutch linkage require Z-Bar Modification or JBA part no. JBA-1650Z for proper fit
2. Bolts in to factory Y-pipe with 85 GT Mustang heat riser valve.
3. Requires welding to exhaust pipe.
4. Requires Y-Pipe.
5. Only Non GT Cars
* JBA Ceramic Coatings provide a Thermal Barrier and help to keep your engine cooler...
** Estimated installation times stated above are based on the averaged times of a professional exhaust installer.

Back to Exhaust

 

 

Website and Contents Copyright © 1998-2010 Automotive Internet Retailers, LLC All rights reserved. Ford, Ford Mustang, Mustang GT, SVT Cobra, Mach 1 Mustang, Cobra R, Bullitt Mustang, SN95, S197, V6 Mustang, Fox Body Mustang, and 5.0 Mustang are registered trademarks of Ford Motor Company. Saleen is a registered trademark of Saleen Incorporated. Roush is a registered trademark of Roush Enterprises Inc. Shelby, GT500, GT500E, GT350 and Eleanor are registered trademarks of Shelby American Inc. Mustang Depot has no affiliation with Ford Motor Company, Roush Enterprises, Shelby American or Saleen. Throughout our website and catalogs, these terms are used for identification purposes only. All Ford logo products are licensed by Ford through the respective manufacturer. All products herein are reproduction parts unless specifically noted as "original" Ford parts. The use of Ford part numbers are under license by Ford through our suppliers Scott Drake Enterprises, or Ford Authorized Dealerships. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Sales taxes are applicable to Nevada residents and in some cases where we drop ship from a warehouse within the same state as the customer. Thank you for choosing Mustang Depot!
Home   |   Terms and Conditions  |  Return Policy  |  Email List    |   Fax/Mail   |   Contact Us

Mustang Depot 2510 E. Sunset Rd #7 Las Vegas, NV 89120


All products which require licensing by Ford, are licensed by Ford by the individual manufacturer or distributor.